HomeOPPOOppo A11s 3G Network Settings
OPPO

Oppo A11s 3G Network Settings

Oppo A11s 3G

3G telecommunication networks on Oppo A11s are suitable for services that transmit information at a minimum of 200 Kbps. Mobile broadband speeds of several Mbps are also presented by later 3G releases, occasionally referred to as 3.5G and 3.75G, to smartphones, tablets, and mobile modems in laptop computers.

Is 3G Network Available in Oppo A11s?

Please note that 3G function is available on Oppo A11s.

How To Switch to 3G on Oppo A11s?

To turn On/Off 3G on Oppo A11s apply this procedure:
1) Tab Settings,
2) Hit SIM cards & mobile networks,
3) Select the SIM card for which you want to configure,
4) Select Mobile networks,
5) Select your preferred option.

How To Know if Oppo A11s is 3G or not?

There are several ways to identify if the 3G function is available on Oppo A11s or not. But these two familiar ways are working on both iOS and Android operating systems:
Way-1
On the top of your Oppo A11s screen, you should be able to see if it says 3G.

Way-2
Apply these steps:
1) Dial *#06# on your phone to know Oppo A11s IMEI number.
2) Browse www.imei.info, type your IMEI number and select Check.
3) You’ll see a report. Look at the LTE section – it will display all the frequencies tha are supported by your phone. 3G service works on the 2100MHz frequency, so if you see the number 2100, then your Oppo A11s is 3G compatible.

Please note that you can always check the phone’s user guide.

Note: LTE Option on mobile setting generally refers to 4G networks.

More Stuff About 3G on Oppo A11s

Understanding LTE:
Long-Term Evolution (LTE) is a standard for wireless broadband connections used for handhelds devices and data terminals. LTE frequencies are:
* 3G networks: 900 MHz and 2100 MHz (band 1 and 39).
* 4G networks: 800 MHz (band 20), 1800 MHz and 2600 MHz (band 7 and 38).
* 5G networks: 700 MHz (band 28) and 3500 MHz (band 78).

Note: LTE Option in mobiles settings generally refers to 4G connections.

What is MHz?
MHz (Megahertz) is a unit of frequency equal to one million cycles per second. It is used to measure the transmission speed of electronic devices, including handheld phone communications.

Band Meaning:
The band is an interval in the frequency domain, delimited by a lower and upper values of transmission capacity over a network communication systems. However, in general we are using bandwidth term to refer to the capacity of a network.

Basic guide to understanding and setting up 3G on Oppo A11s to improve mobile communication to the Internet and multimedia sharing

Leave a Comment

Your email address will not be published. Required fields are marked *

You might also like