When developing vivo X70 Pro 3G (3d Generation Mobile), it’s been considered to support 2G network so we can benefit from this preceding network. However, the major target to be launched is to grant 3G vivo X70 Pro a high speed wireless connection regardless of the data type whether it is multimedia, video, or voice calls.
Is 3G available on vivo X70 Pro?
Please know that 3G function is available on vivo X70 Pro.
Change 3G Settings on vivo X70 Pro
To switch On/Off 3G on vivo X70 Pro follow this way:
1) Go to Settings
2) Hit Network & internet
3) Tap SIM card & mobile network
4) Choose SIM 1 or SIM 2
5) Tap Mobile networks
6) Hit your preferred option.
Steps to Know That 3G Is Available on vivo X70 Pro
In fact, there are several ways to tell if 3G function is available on vivo X70 Pro or not. But these two familiar ways are working on both iOS and Android operating systems:
Way-1
On the top of your vivo X70 Pro screen you should be able to see if it says 3G.
Way-2
Here you need to do the following steps:
1) Dial *#06# on your phone to identify vivo X70 Pro IMEI number.
2) Browse www.imei.info, type your IMEI number and select Check.
3) You’ll see a report. Look at the LTE section – it will display all the frequencies that are supported by your phone. 3G service runs on the 2100MHz frequency, so if you find the number 2100, then your vivo X70 Pro is 3G compatible.
Please note that you can always check the phone’s user manual.
Note: LTE Option on mobile setting generally refers to 4G networks.
Technical Information About vivo X70 Pro 3G Network
Understanding LTE:
Long-Term Evolution (LTE) is a standard for wireless broadband communication used for mobile devices and data terminals. Its frequencies as following:
* 3G connections: 900 MHz and 2100 MHz (band 1 and 39).
* 4G connections: 800 MHz (band 20), 1800 MHz and 2600 MHz (band 7 and 38).
* 5G connections: 700 MHz (band 28) and 3500 MHz (band 78).
Note: LTE Option in mobiles settings generally refers to 4G connections.
Knowing More About MHz:
MHz (Megahertz) is a unit of frequency equal to one million cycles per second. It is used to measure the transmission speed of electronic devices, including mobile phone communications.
Knowing More About Band:
The band is an interval in the frequency domain, delimited by a lower and upper values of transmission capacity over network communication systems. However, in general we are using bandwidth expression to refer to the capacity of a network.