3G communication networks on Xiaomi Redmi K30S is suitable for services that transmit information at a minimum of 200 Kbps. Cellular broadband speeds of several Mbps are also presented by later 3G releases, occasionally referred to as 3.5G and 3.75G, to smartphones, tablets, and mobile modems in laptop computers.
Does Xiaomi Redmi K30S Has 3G Function?
Please know that 3G technology is available on the Xiaomi Redmi K30S.
Turn On 3G on Xiaomi Redmi K30S
To turn On/Off 3G on the Xiaomi Redmi K30S follow These steps:
1) Select Settings,
2) Select SIM cards & mobile networks,
3) Tab the SIM card for which you want to configure,
4) Tab Mobile Networks,
5) Select your preferred option.
The Best Process to Figure if Xiaomi Redmi K30S is 3G Device
Because these two ways are working on both iOS and Android operating systems, we can consider them as the prime way to know if Xiaomi Redmi K30S 3G network is available or not.
Way-1
There is an icon on the top of the Xiaomi Redmi K30S that refers if the 3G network is available or not.
Way-2
To see if your Xiaomi Redmi K30S supports a 3G network or not, you can use this way:
1) Dial *#06# on your phone to display Xiaomi Redmi K30S IMEI number.
2) Explore www.imei.info, type your IMEI numbe,,r and select Check.
3) You’ll see a report. Look at the LTE section – it will display all the frequencies that are supported by your Xiaomi Redmi K30S. 3G service works on the 2100MHz frequency, so if you see the number 2100, then your Xiaomi Redmi K30S is 3G compatible.
Please note that you can always check the phone’s user guide.
Note: LTE Option on mobile settings generally refers to a 4G network.
Knowing More About Xiaomi Redmi K30S 3G
LTE Meaning:
Long-Term Evolution (LTE) is a standard for wireless broadband connections used for mobile devices and data terminals. Its frequencies are as follows:
* 3G connections: 900 MHz and 2100 MHz (bands 1 and 39).
* 4G networks: 800 MHz (band 20), 1800 MHz, and 2600 MHz (bands 7 and 38).
* 5G networks: 700 MHz (band 28) and 3500 MHz (band 78).
Note: LTE Option in mobile settings generally refers to 4G connections.
MHz Meaning:
MHz (Megahertz) is a unit of frequency equal to one million cycles per second. It is used to measure the transmission speed of electronic devices, including handheld phone communications.
Band Meaning:
The band is an interval in the frequency domain, delimited by lower and upper values of transmission capacity over a network communication system. However, broadly we are using bandwidth term to refer to the capacity of a network.
In this article, What you need to know about Xiaomi Redmi K30S 3G communication network, which offers higher bandwidth