3G communication networks on HTC Desire 626s are adequate with services that transfer information at a minimum of 200 Kbps. Cellular broadband speeds of several Mbps are also offered by later 3G releases (occasionally referred to as 3.5G and 3.75G) to smartphones, tablets, and mobile modems in laptop computers.
Is 3G available on HTC Desire 626s?
Please know that HTC Desire 626s has 3G network mode.
How To Switch to 3G on HTC Desire 626s ?
To switch On/Off 3G on HTC Desire 626s follow this procedure:
1) Go to Settings
2) Under Wireless & networks, hit Mobile data
3) Tap Network mode
4) Choose the preferred network.
Steps to Know That 3G Is Available on HTC Desire 626s
Because these two methods are working on both iOS and Android operating systems, we can count it as the major ways to identify if HTC Desire 626s 3G network is available or not.
Way-1
There is an icon on the top of the HTC Desire 626s screen indicates if 3G network is available or not.
Way-2
To know if your HTC Desire 626s has 3G network or not, you may use this procedure:
1) Dial *#06# on your mobile to know HTC Desire 626s IMEI number.
2) Browse www.imei.info, then write your IMEI number and choose Check.
3) You’ll see a report. Look at the LTE section – it will display all the frequencies that are supported by your HTC Desire 626s. 3G service runs on the 2100MHz frequency, so if you see the number 2100, then your HTC Desire 626s is 3G compatible.
Please note that you can always check the phone’s user guide.
Note: LTE Option on mobile settings generally refers to 4G network.
More Stuff About 3G on HTC Desire 626s
What is LTE?
Long-Term Evolution (LTE) is a standard for wireless broadband connections used for cellular devices and data terminals. LTE frequencies are:
* 3G networks: 900 MHz and 2100 MHz (band 1 and 39).
4G networks: 800 MHz (band 20), 1800 MHz and 2600 MHz (band 7 and 38).
* 5G networks: 700 MHz (band 28) and 3500 MHz (band 78).
Note: LTE Option in mobiles settings generally refers to 4G networks.
What is MHz?
MHz (Megahertz) is a unit of frequency equal to one million cycles per second. It is used to measure the transmission speed of electronic devices, including cellular phone communications.
Knowing More About Band:
The band is an interval in the frequency domain, delimited by a lower and upper values of transmission capacity over network communication systems. However, broadly we are using bandwidth word to refer to the capacity of a network.