HomeLGEnabling LG Stylo 5 3G Network
LG

Enabling LG Stylo 5 3G Network

LG Stylo 5 3G

The 3G innovation (short for a 3rd generation) is newer generation of wireless technology. in terms of speed and functionality 3G is much better than preceding 2G networks, that because LG Stylo 5 3G devices gives higher data transfer rates.

Is LG Stylo 5 3g ?

Please note that LG Stylo 5 has 3G facility.

LG Stylo 5 3G

Set Up 3G Option on LG Stylo 5

To switch On/Off 3G on LG Stylo 5 apply this way:
1) Tap Settings,
2) Select Mobile networks,
3) Hit Network operators,
4) Tap Search networks,
5) Tap your preferred option.

LG Stylo 5 3G

Steps To Know That 3G Is Available on LG Stylo 5

Actually, there are many manners to tell if 3G function is available on LG Stylo 5 or not. But these two most popular ways are working on both iOS and Android operating systems:
Way-1
On the top of your LG Stylo 5 screen you should be able to see if it says 3G.

Way-2
Follow these steps to identify if your LG Stylo 5 is 3G:
1) Dial *#06# on your phone to know LG Stylo 5 IMEI number.
2) Browse www.imei.info, type your IMEI number and choose Check.
3) You’ll see a report. Look at the LTE section – it will display all the frequencies that are supported by your phone. 3G service runs on the 2100MHz frequency, so if you see the number 2100, then your LG Stylo 5 is 3G compatible.

Please note that you can always check the phone’s user manual.

Note: LTE Option on mobile setting commonly refers to 4G connections.

LG Stylo 5 3G

LG Stylo 5 3G – Knowing More

Understanding LTE:
Long-Term Evolution (LTE) is a standard for wireless broadband connections used for mobile devices and data terminals. Here are Its frequencies:
* 3G connections: 900 MHz and 2100 MHz (band 1 and 39).
4G connections: 800 MHz (band 20), 1800 MHz and 2600 MHz (band 7 and 38).
* 5G connections: 700 MHz (band 28) and 3500 MHz (band 78).

Note: LTE Option in mobiles settings generally refers to 4G networks.

Knowing More About MHz:
MHz (Megahertz) is a unit of frequency equal to one million cycles per second. It is used to measure the transmission speed of electronic devices, including cellular phone communications.

Understanding Band:
The band is an interval in the frequency domain, restricted by a lower and upper values of transmission capacity over network communication systems. However, in general we are using bandwidth word to refer to the capacity of a network.

Leave a Comment

Your email address will not be published. Required fields are marked *

You might also like