3G telecommunication networks on Motorola Moto E40 are adequate with services that transfer information at a minimum of 200 Kbps. Mobile broadband speeds of several Mbps are also presented by later 3G releases (sometimes referred to as 3.5G and 3.75G) to smartphones, tablets, and mobile modems in laptop computers.
Does Motorola Moto E40 have 3G Function?
Please know that 3G network mode is available on Motorola Moto E40.
Switching ON/OFF 3G on Motorola Moto E40
To switch On/Off 3G on Motorola Moto E40 apply this method:
1) Go to Settings
2) Choose Network & Internet
3) Tap Mobile network
4) Select Preferred network type
5) Tap your network type.
Main Ways to Identify If Motorola Moto E40 Is 3G
In fact, there are many methods to know if 3G function is available on Motorola Moto E40 or not. But these two famous ways are working on both iOS and Android operating systems:
Way-1
On the top of your Motorola Moto E40 screen you should be able to see if it says 3G.
Way-2
Follow these steps to identify if your Motorola Moto E40 is 3G:
1) Dial *#06# on your phone to identify Motorola Moto E40 IMEI number.
2) Go to www.imei.info, type your IMEI number and select Check.
3) You’ll see a report. Look at the LTE section – it will display all the frequencies that are supported by your phone. 3G service runs on the 2100MHz frequency, so if you find the number 2100, then your Motorola Moto E40 is 3G compatible.
Please note that you can always check the phone’s user manual.
Note: LTE Option on mobile setting generally refers to 4G networks.
More Stuff About 3G on Motorola Moto E40
What is LTE?
Long-Term Evolution (LTE) is a standard for wireless broadband communication used for handhelds devices and data terminals. Its frequencies as following:
* 3G connections: 900 MHz and 2100 MHz (band 1 and 39).
* 4G connections: 800 MHz (band 20), 1800 MHz and 2600 MHz (band 7 and 38).
* 5G connections: 700 MHz (band 28) and 3500 MHz (band 78).
Note: LTE Option in mobiles settings generally refers to 4G connections.
What is MHz?
MHz (Megahertz) is a unit of frequency equal to one million cycles per second. It is used to measure the transmission speed of electronic devices, including handheld phone communications.
Understanding Band:
The band is an interval in the frequency domain, delimited by a lower and upper values of transmission capacity over network communication systems. However, in general we are using bandwidth expression to refer to the capacity of a network.
Find out the correct setting for 3G on Motorola Moto E40 if it is not turned On, and a lot more in this article about utilizing 3G network mode