HomeVivoHow to Change 3G Settings for vivo iQOO?
Vivo

How to Change 3G Settings for vivo iQOO?

vivo iQOO 3G

3G communication networks on vivo iQOO are adequate with services that transmit information at a minimum of 200 Kbps. Cellular broadband speeds of several Mbps are also offered by later 3G releases (occasionally referred to as 3.5G and 3.75G) to smartphones, tablets, and mobile modems in laptop computers.

Is 3G available on vivo iQOO?

Please know that 3G facility is available on vivo iQOO.

vivo iQOO 3G

How to Turn On/Off 3G on vivo iQOO ?

To switch On/Off 3G on vivo iQOO follow this way:
1) Go to Settings
2) Choose Network & internet
3) Tap SIM card & mobile network
4) Choose SIM 1 or SIM 2
5) Select Mobile networks
6) Hit your network type.

vivo iQOO 3G

How to Know If vivo iQOO 3G or Not?

In fact, there are many ways to tell if 3G function is available on vivo iQOO or not. But these two most popular ways are working on both iOS and Android operating systems:
Way-1
On the top of your vivo iQOO screen you should be able to see if it says 3G.

Way-2
Here you need to do the following steps:
1) Dial *#06# on your phone to know vivo iQOO IMEI number.
2) Explore www.imei.info, type your IMEI number and select Check.
3) You’ll see a report. Look at the LTE section – it will display all the frequencies that are supported by your phone. 3G service runs on the 2100MHz frequency, so if you find the number 2100, then your vivo iQOO is 3G compatible.

Please note that you can always check the phone’s user manual.

Note: LTE Option on mobile setting generally refers to 4G networks.

vivo iQOO 3G

More Stuff About 3G on vivo iQOO

LTE Meaning:
Long-Term Evolution (LTE) is a standard for wireless broadband communication used for mobile devices and data terminals. LTE frequencies are:
3G connections: 900 MHz and 2100 MHz (band 1 and 39).
4G connections: 800 MHz (band 20), 1800 MHz and 2600 MHz (band 7 and 38).
5G connections: 700 MHz (band 28) and 3500 MHz (band 78).

Note: LTE Option in mobiles settings generally refers to 4G connections.

Understanding MHz:
MHz (Megahertz) is a unit of frequency equal to one million cycles per second. It is used to measure the transmission speed of electronic devices, including handheld phone communications.

Understanding Band:
The band is an interval in the frequency domain, restricted by a lower and upper values of transmission capacity over network communication systems. However, in general we are using bandwidth word to refer to the capacity of a network.

Leave a Comment

Your email address will not be published. Required fields are marked *

You might also like