HomeXiaomiHow to Change Network on Xiaomi Mi CC9 3G
Xiaomi

How to Change Network on Xiaomi Mi CC9 3G

Xiaomi Mi CC9 3G

Despite being widely employed for business applications, Xiaomi Mi CC9 3G technology was primarily designed for the mobile scope. The third generation of wireless networking technology, or Xiaomi Mi CC9 3G, supplies devices with high-speed bandwidth (high data transmission rates).

Is 3G Network Available in Xiaomi Mi CC9?

Please note that 3G facility is available on Xiaomi Mi CC9.

Xiaomi Mi CC9 3G

How to Turn On/Off 3G on Xiaomi Mi CC9

To switch On/Off 3G on Xiaomi Mi CC9 , follow these steps:
1) Tab Settings,
2) Select SIM cards & mobile networks,
3) Hit the SIM card for which you want to configure,
4) Tab Mobile Networks,
5) Hit your preferred option.

Xiaomi Mi CC9 3G

How To Tell If Your Xiaomi Mi CC9 Is 3G?

Actually, there are several ways to know if 3G function is available on Xiaomi Mi CC9 or not. But these two familiar ways are working on both iOS and Android operating systems:
Way-1
On the top of your Xiaomi Mi CC9 screen you should be able to see if it says 3G.

Way-2
Here you need to do the following steps:
1) Dial *#06# on your phone to get Xiaomi Mi CC9 IMEI number.
2) Go to www.imei.info, write your IMEI number and select Check.
3) You’ll see a report. Look at the LTE section – it will display all the frequencies that supported by your phone. 3G service works on the 2100MHz frequency, so if you see the number 2100, then your Xiaomi Mi CC9 is 3G compatible.

Please note that you can always check the phone’s user guide.

Note: LTE Option on mobiles setting generally refers to 4G networks.

Xiaomi Mi CC9 3G

Xiaomi Mi CC9 3G – More Terminology

LTE Meaning:
Long-Term Evolution (LTE) is a standard for wireless broadband connections used for handhelds devices and data terminals. LTE frequencies are:
* 3G networks: 900 MHz and 2100 MHz (band 1 and 39).
* 4G networks: 800 MHz (band 20), 1800 MHz and 2600 MHz (band 7 and 38).
* 5G networks: 700 MHz (band 28) and 3500 MHz (band 78).

Note: LTE Option in mobiles settings generally refers to 4G connections.

Understanding MHz:
MHz (Megahertz) is a unit of frequency equal to one million cycles per second. It is used to measure the transmission speed of electronic devices, including cellular phone communications.

Understanding Band:
The band is an interval in the frequency domain, delimited by a lower and upper values of transmission capacity over a network communication systems. However, in general we are using bandwidth word to refer to the capacity of a network.

Leave a Comment

Your email address will not be published. Required fields are marked *

You might also like