The 3G standard (short for third generation) is newer generation of cellular technology. in terms of speed and efficiency 3G is much better than preceding 2G networks, that because Xiaomi Redmi Note 11 3G mobiles grants higher speed bandwidth.
Xiaomi Redmi Note 11 3G Availability
Please note that Xiaomi Redmi Note 11 has3G facility.
How to Switch to3G on Xiaomi Redmi Note 11 ?
To switch On/Off3G on Xiaomi Redmi Note 11 , apply this procedure:
1) Choose Settings,
2) Choose SIM cards & mobile networks,
3) Hit the SIM card for which you want to configure,
4) Choose Mobile Networks,
5) Choose your preferred option.
How To Tell If Your Xiaomi Redmi Note 11 3G or not?
In fact, there are many ways to tell if 3G function is available on Xiaomi Redmi Note11 or not. However these two most used ways are working on both iOS and Android operating systems:
Way-1
On the top of your Xiaomi Redmi Note11 screen you should be able to see if it says 3G.
Way-2
Apply these steps:
1) Dial *#06# on your phone to identify Xiaomi Redmi Note 11 IMEI number.
2) Explore www.imei.info, enter your IMEI number and select Check.
3) You’ll see a report. Look at the LTE section – it will display all the frequencies that supported by your phone. 3G service runs on the 2100MHz frequency, so if you see the number 2100, then your Xiaomi Redmi Note 11 is 3G compatible.
Please note that you can always check the phone’s user manual.
Note: LTE Option on mobiles setting generally refers to 4G connections.
Technical Information About Xiaomi Redmi Note 11 3G Network
LTE Meaning:
Long-Term Evolution (LTE) is a standard for wireless broadband communication used for handhelds devices and data terminals. Its frequencies as following:
3G networks: 900 MHz and 2100 MHz (band 1 and 39).
4G connections: 800 MHz (band 20), 1800 MHz and 2600 MHz (band 7 and 38).
5G connections: 700 MHz (band 28) and 3500 MHz (band 78).
Note: LTE Option in mobiles settings generally refers to 4G networks.
Understanding MHz:
MHz (Megahertz) is a unit of frequency equal to one million cycles per second. It is used to measure the transmission speed of electronic devices, including handheld phone communications.
Understanding Band:
The band is an interval in the frequency domain, defined by a lower and upper values of transmission capacity over a network communication systems. However, in general we are using bandwidth word to refer to the capacity of a network.